- INFO
- DIRECTIONS
- SAFETY
CC-300 - Ready To Use
Do Not Dilute - Water Will Neutralize
Industrial Cooling System Restoration Technology Has Changed
With over 25 years experience, we have developed and manufactured proven formulas and techniques to restore your cooling systems back to optimal performance.
No other product or service can compare to what we consistently deliver.
External Fin/Fan Cooler Cleaning:
Our CC-300 cooler cleaner will improve cooling efficiency, maximize system output, reduce downtime, reduce maintenance, and engines & cooling systems will operate at lower temperatures.
Each millimeter of dirt = 10% or more loss in efficiency.
CC-300 will restore your cooling system "while in place" to its optimal operating level.
CC-300 - Readily Biodegradable, Safe To Use.
CC-300 - Will Not Damage Aluminum, Steel, Copper, Brass, or Environment.
We utilize the perfect combination of pressure, foaming, and volume to deliver CC-300 to ensure all cooling fins are thoroughly cleaned.
Would you like a cleaner, more efficient cooling system operating at optimum efficiency with less downtime, repair/maintenance costs, and less natural gas wasted on blowdowns?
CC-300 - RTU - Ready To Use
Do Not Dilute - Water Will Neutralize
For FinFan Coolers - 1 Gallon Covers 20 SQF
Ultimate Chemicals
Cooler Cleaning Procedures
- Tailgate Safety Meeting
- Record ambient and coolant temps.
- Shutdown engine.
- Lockout/Tag-out.
Chemical Application
- Connect CC-300 to 2800-3000 PSI – 2.5 GPM Pressure Washer.
- Connect Aerator Foaming Tip.
- Start at the far side from access, bottom first.
- Slowly apply CC-300 in ‘up-and-down’ motion with a 12” width as it contacts the fins.
- Adjust speed according to conditions. Must blow through.
- As you near the end, switch to water and continue application until spray is clear water.
- Continue to allow water to fully rinse lines, pump, gun and tip.
- WAIT 20-30 MINUTES. Let the Chemical do the work.
Water Rinsing
- Connect Clean Water to 4000 PSI – 4.5 GPM Pressure Washer.
- Connect either a 40° or 25° - 6.5 Rinse Tip.
- Starting at the top away from access, Slowly rinse in ‘up-and-down’ motion at 2” – 4” away from fins until clean and rinse water is clear.
- Request inspection and thumbs-up from client.
- Record ambient and coolant temps after running 30 minutes.
SAFE
Contains no muratic, nitric, chromic, oxalic, or other harsh uninhibited acids.
NON-CORROSIVE
When properly used, is non-corrosive to normal materials.
CC-300 is inhibited to prevent metal loss.
CC-300 contains no salt (sodium chloride) or other chloride type electrolytes